ESA: Euclid vision cleared after being fogged by ground ice, after launch
The European Space Agency (ESA) today announced that engineers have successfully “de-iced” the optics of its new Euclid space telescope that developed after it was launched in July 2023.
It was always expected that water could gradually build up and contaminate Euclid’s vision, as it is very difficult to build and launch a spacecraft from Earth without some of the water in our planet’s atmosphere creeping into it. For this reason, there was an ‘outgassing campaign’ shortly after launch where the telescope was warmed up by onboard heaters and also partially exposed to the Sun, sublimating most of the water molecules present at launch on or very near Euclid’s surfaces. A considerable fraction, however, has survived, by being absorbed in the multi-layer insulation, and is now being slowly released in the vacuum of space.
After a huge amount of research – including lab studies into how minuscule layers of ice on mirror surfaces scatter and reflect light – and months of calibrations in space, the team determined that several layers of water molecules are likely frozen onto mirrors in Euclid’s optics. Likely just a few to few tens of nanometres thick – equivalent to the width of a strand of DNA – it’s a remarkable testament to the mission’s sensitivity that it is detecting such tiny amounts of ice.
While Euclid’s observations and science continue, teams have come up with a plan to understand where the ice is in the optical system and mitigate its impact now and in the future, if it continues to accumulate.
It appears this new process has worked, according to a short update at the link.
Normally spacecraft are vented both on the ground during thermal testing, as well as when they reach orbit. It appears some of these normal procedures were either insufficient for Euclid’s needs, or threatened its optics if done as usual. This press release suggests that Euclid required very targeted venting processes that would not harm its sensitive optics, and that the procedures have worked.
I must admit I am suspicious of these claims. During development and after launch Euclid has had a number of problems. First, back in 2017 the NASA instrument on the telescope had to be completely rebuilt when it was found to be defective. Second, after launch engineers discovered unexpected light leaks on the mirror that now limit where it can look. Third, the telescope required a software patch to fix its pointing system, which was confusing cosmic rays for guide stars, causing it to shift positions randomly.
I can’t help wondering if this icing on the mirrors was also due, not to actual planning as suggested by ESA’s press release, but to poor ground testing and engineering that missed what is a common problem on spacecraft and thus required a post-launch improvised fix. I admit I might be wrong, but I still wonder.
The European Space Agency (ESA) today announced that engineers have successfully “de-iced” the optics of its new Euclid space telescope that developed after it was launched in July 2023.
It was always expected that water could gradually build up and contaminate Euclid’s vision, as it is very difficult to build and launch a spacecraft from Earth without some of the water in our planet’s atmosphere creeping into it. For this reason, there was an ‘outgassing campaign’ shortly after launch where the telescope was warmed up by onboard heaters and also partially exposed to the Sun, sublimating most of the water molecules present at launch on or very near Euclid’s surfaces. A considerable fraction, however, has survived, by being absorbed in the multi-layer insulation, and is now being slowly released in the vacuum of space.
After a huge amount of research – including lab studies into how minuscule layers of ice on mirror surfaces scatter and reflect light – and months of calibrations in space, the team determined that several layers of water molecules are likely frozen onto mirrors in Euclid’s optics. Likely just a few to few tens of nanometres thick – equivalent to the width of a strand of DNA – it’s a remarkable testament to the mission’s sensitivity that it is detecting such tiny amounts of ice.
While Euclid’s observations and science continue, teams have come up with a plan to understand where the ice is in the optical system and mitigate its impact now and in the future, if it continues to accumulate.
It appears this new process has worked, according to a short update at the link.
Normally spacecraft are vented both on the ground during thermal testing, as well as when they reach orbit. It appears some of these normal procedures were either insufficient for Euclid’s needs, or threatened its optics if done as usual. This press release suggests that Euclid required very targeted venting processes that would not harm its sensitive optics, and that the procedures have worked.
I must admit I am suspicious of these claims. During development and after launch Euclid has had a number of problems. First, back in 2017 the NASA instrument on the telescope had to be completely rebuilt when it was found to be defective. Second, after launch engineers discovered unexpected light leaks on the mirror that now limit where it can look. Third, the telescope required a software patch to fix its pointing system, which was confusing cosmic rays for guide stars, causing it to shift positions randomly.
I can’t help wondering if this icing on the mirrors was also due, not to actual planning as suggested by ESA’s press release, but to poor ground testing and engineering that missed what is a common problem on spacecraft and thus required a post-launch improvised fix. I admit I might be wrong, but I still wonder.