Relativity provides detailed video update on the development of its Terran-R rocket
The rocket startup Relativity yesterday uploaded a 42-minute long video on Youtube describing in great detail the status of its Terran-R rocket, providing a great deal of information about its design, construction, and goals, including the significant changes the company has made from its much smaller Terran-1 rocket.
I have embedded that video below.
Several take-aways: First, the video devotes a long segment explaining why the company has abandoned its long expressed goal of making a rocket entirely 3D printed. It found with Terran-1 that 3D printing the rocket’s body and fairing was not cost effective. It took too long and was too expensive. Using aluminum is faster and cheaper, especially as Relativity is no longer doing this in-house. Instead, it appears they are partnering long term with specific outside vendors for the rocket shells, tanks, and domes, as well as the fairings.
Second, the company is aiming to make the rocket’s first stage reusable from the start, making the first landing attempts on the first launch. They also recognize that success will take time and many attempts, similar to SpaceX’s experience a decade ago.
Third, they are pushing to go into major production of the rocket by 2026, so that when they launch the first time they will have more rockets ready to quickly follow up with more launches. This schedule is extremely fast, as they only started rocket development in the spring of 2023.
Finally and most important, the video provides no dates for that first launch. Previous releases from the company had suggested a 2026 first launch, and officials in the video implied that they might be ready by 2026, but no one said so directly. My guess is that 2026 is no longer realistic (not that it ever was), and they are beginning to prepare the public for a later launch date.
One other new development at Relativity not mentioned in the video. The company has named former Google CEO Eric Schmidt as its new CEO, with the company’s founder, Tim Ellis, stepping down as CEO to transition to the company’s board of directors. This change could be related to rumors last year that the company was having problems.
Readers!
My annual February birthday fund-raising drive for Behind the Black is now over. Thank you to everyone who donated or subscribed. While not a record-setter, the donations were more than sufficient and slightly above average.
As I have said many times before, I can’t express what it means to me to get such support, especially as no one is required to pay anything to read my work. Thank you all again!
For those readers who like my work here at Behind the Black and haven't contributed so far, please consider donating or subscribing. My analysis of space, politics, and culture, taken from the perspective of an historian, is almost always on the money and ahead of the game. For example, in 2020 I correctly predicted that the COVID panic was unnecessary, that the virus was apparently simply a variation of the flu, that masks were not simply pointless but if worn incorrectly were a health threat, that the lockdowns were a disaster and did nothing to stop the spread of COVID. Every one of those 2020 conclusions has turned out right.
Your help allows me to do this kind of intelligent analysis. I take no advertising or sponsors, so my reporting isn't influenced by donations by established space or drug companies. Instead, I rely entirely on donations and subscriptions from my readers, which gives me the freedom to write what I think, unencumbered by outside influences.
You can support me either by giving a one-time contribution or a regular subscription. There are four ways of doing so:
1. Zelle: This is the only internet method that charges no fees. All you have to do is use the Zelle link at your internet bank and give my name and email address (zimmerman at nasw dot org). What you donate is what I get.
2. Patreon: Go to my website there and pick one of five monthly subscription amounts, or by making a one-time donation.
3. A Paypal Donation or subscription:
4. Donate by check, payable to Robert Zimmerman and mailed to
Behind The Black
c/o Robert Zimmerman
P.O.Box 1262
Cortaro, AZ 85652
You can also support me by buying one of my books, as noted in the boxes interspersed throughout the webpage or shown in the menu above.
The rocket startup Relativity yesterday uploaded a 42-minute long video on Youtube describing in great detail the status of its Terran-R rocket, providing a great deal of information about its design, construction, and goals, including the significant changes the company has made from its much smaller Terran-1 rocket.
I have embedded that video below.
Several take-aways: First, the video devotes a long segment explaining why the company has abandoned its long expressed goal of making a rocket entirely 3D printed. It found with Terran-1 that 3D printing the rocket’s body and fairing was not cost effective. It took too long and was too expensive. Using aluminum is faster and cheaper, especially as Relativity is no longer doing this in-house. Instead, it appears they are partnering long term with specific outside vendors for the rocket shells, tanks, and domes, as well as the fairings.
Second, the company is aiming to make the rocket’s first stage reusable from the start, making the first landing attempts on the first launch. They also recognize that success will take time and many attempts, similar to SpaceX’s experience a decade ago.
Third, they are pushing to go into major production of the rocket by 2026, so that when they launch the first time they will have more rockets ready to quickly follow up with more launches. This schedule is extremely fast, as they only started rocket development in the spring of 2023.
Finally and most important, the video provides no dates for that first launch. Previous releases from the company had suggested a 2026 first launch, and officials in the video implied that they might be ready by 2026, but no one said so directly. My guess is that 2026 is no longer realistic (not that it ever was), and they are beginning to prepare the public for a later launch date.
One other new development at Relativity not mentioned in the video. The company has named former Google CEO Eric Schmidt as its new CEO, with the company’s founder, Tim Ellis, stepping down as CEO to transition to the company’s board of directors. This change could be related to rumors last year that the company was having problems.
Readers!
My annual February birthday fund-raising drive for Behind the Black is now over. Thank you to everyone who donated or subscribed. While not a record-setter, the donations were more than sufficient and slightly above average.
As I have said many times before, I can’t express what it means to me to get such support, especially as no one is required to pay anything to read my work. Thank you all again!
For those readers who like my work here at Behind the Black and haven't contributed so far, please consider donating or subscribing. My analysis of space, politics, and culture, taken from the perspective of an historian, is almost always on the money and ahead of the game. For example, in 2020 I correctly predicted that the COVID panic was unnecessary, that the virus was apparently simply a variation of the flu, that masks were not simply pointless but if worn incorrectly were a health threat, that the lockdowns were a disaster and did nothing to stop the spread of COVID. Every one of those 2020 conclusions has turned out right.
Your help allows me to do this kind of intelligent analysis. I take no advertising or sponsors, so my reporting isn't influenced by donations by established space or drug companies. Instead, I rely entirely on donations and subscriptions from my readers, which gives me the freedom to write what I think, unencumbered by outside influences.
You can support me either by giving a one-time contribution or a regular subscription. There are four ways of doing so:
1. Zelle: This is the only internet method that charges no fees. All you have to do is use the Zelle link at your internet bank and give my name and email address (zimmerman at nasw dot org). What you donate is what I get.
2. Patreon: Go to my website there and pick one of five monthly subscription amounts, or by making a one-time donation.
3. A Paypal Donation or subscription:
4. Donate by check, payable to Robert Zimmerman and mailed to
Behind The Black
c/o Robert Zimmerman
P.O.Box 1262
Cortaro, AZ 85652
You can also support me by buying one of my books, as noted in the boxes interspersed throughout the webpage or shown in the menu above.
I like Relativity. They started with a radical hypothesis, threw it against reality to find out how far they can go with it, and are now refining it. An experimental mindset.
Only recently did I start learning about manufacturing engineering and engineering economics and understand better why 3D printing has niches that it does or will dominate and in other areas traditional processes continue to be superior.
Relativity was pushing boundaries and challenging conventional wisdom (to find out that most holds true). They started on the more risk-taking side, dangerous but honorable. Wish them all the best.