HP to mass produce large 3D metal printers
The replicators are coming! HP has announced that it plans to mass produce a large 3D metal printer that can be used by large industrial manufacturers.
Each Metal Jet production machine will cost less than US$400,000, and will give you a maximum build volume of 430 x 320 x 200 mm (16.9 x 12.6 x 7.9 inches).
HP is timetabling the Metal Jet roadmap in stages. Right now, it’s already operational in two pilot programs. Metal injection molding specialist Parmatech is using it to produce medical equipment like surgical scissors and endoscopic surgical jaws, and GKN Powder Metallurgy is producing parts for automotive and industrial giants like Volkswagen and Wilo.
In 2019, HP will start up a production service, which will allow manufacturers to upload 3D design files and have them printed out in industrial quantities by Parmatech and GKN. The printers themselves will begin shipping in 2020, with “broad availability in 2021.” Desktop Metal, for its part, has pushed back availability of its production machines from this year to 2019.
HP is not the first to do this, but this appears to be the largest-scale production attempt.
Readers!
Please consider supporting my work here at Behind the Black. Your support allows me the freedom and ability to analyze objectively the ongoing renaissance in space, as well as the cultural changes -- for good or ill -- that are happening across America. Fourteen years ago I wrote that SLS and Orion were a bad ideas, a waste of money, would be years behind schedule, and better replaced by commercial private enterprise. Only now does it appear that Washington might finally recognize this reality.
In 2020 when the world panicked over COVID I wrote that the panic was unnecessary, that the virus was apparently simply a variation of the flu, that masks were not simply pointless but if worn incorrectly were a health threat, that the lockdowns were a disaster and did nothing to stop the spread of COVID. Only in the past year have some of our so-called experts in the health field have begun to recognize these facts.
Your help allows me to do this kind of intelligent analysis. I take no advertising or sponsors, so my reporting isn't influenced by donations by established space or drug companies. Instead, I rely entirely on donations and subscriptions from my readers, which gives me the freedom to write what I think, unencumbered by outside influences.
You can support me either by giving a one-time contribution or a regular subscription. There are four ways of doing so:
1. Zelle: This is the only internet method that charges no fees. All you have to do is use the Zelle link at your internet bank and give my name and email address (zimmerman at nasw dot org). What you donate is what I get.
2. Patreon: Go to my website there and pick one of five monthly subscription amounts, or by making a one-time donation.
3. A Paypal Donation or subscription:
4. Donate by check, payable to Robert Zimmerman and mailed to
Behind The Black
c/o Robert Zimmerman
P.O.Box 1262
Cortaro, AZ 85652
You can also support me by buying one of my books, as noted in the boxes interspersed throughout the webpage or shown in the menu above.
The replicators are coming! HP has announced that it plans to mass produce a large 3D metal printer that can be used by large industrial manufacturers.
Each Metal Jet production machine will cost less than US$400,000, and will give you a maximum build volume of 430 x 320 x 200 mm (16.9 x 12.6 x 7.9 inches).
HP is timetabling the Metal Jet roadmap in stages. Right now, it’s already operational in two pilot programs. Metal injection molding specialist Parmatech is using it to produce medical equipment like surgical scissors and endoscopic surgical jaws, and GKN Powder Metallurgy is producing parts for automotive and industrial giants like Volkswagen and Wilo.
In 2019, HP will start up a production service, which will allow manufacturers to upload 3D design files and have them printed out in industrial quantities by Parmatech and GKN. The printers themselves will begin shipping in 2020, with “broad availability in 2021.” Desktop Metal, for its part, has pushed back availability of its production machines from this year to 2019.
HP is not the first to do this, but this appears to be the largest-scale production attempt.
Readers!
Please consider supporting my work here at Behind the Black. Your support allows me the freedom and ability to analyze objectively the ongoing renaissance in space, as well as the cultural changes -- for good or ill -- that are happening across America. Fourteen years ago I wrote that SLS and Orion were a bad ideas, a waste of money, would be years behind schedule, and better replaced by commercial private enterprise. Only now does it appear that Washington might finally recognize this reality.
In 2020 when the world panicked over COVID I wrote that the panic was unnecessary, that the virus was apparently simply a variation of the flu, that masks were not simply pointless but if worn incorrectly were a health threat, that the lockdowns were a disaster and did nothing to stop the spread of COVID. Only in the past year have some of our so-called experts in the health field have begun to recognize these facts.
Your help allows me to do this kind of intelligent analysis. I take no advertising or sponsors, so my reporting isn't influenced by donations by established space or drug companies. Instead, I rely entirely on donations and subscriptions from my readers, which gives me the freedom to write what I think, unencumbered by outside influences.
You can support me either by giving a one-time contribution or a regular subscription. There are four ways of doing so:
1. Zelle: This is the only internet method that charges no fees. All you have to do is use the Zelle link at your internet bank and give my name and email address (zimmerman at nasw dot org). What you donate is what I get.
2. Patreon: Go to my website there and pick one of five monthly subscription amounts, or by making a one-time donation.
3. A Paypal Donation or subscription:
4. Donate by check, payable to Robert Zimmerman and mailed to
Behind The Black
c/o Robert Zimmerman
P.O.Box 1262
Cortaro, AZ 85652
You can also support me by buying one of my books, as noted in the boxes interspersed throughout the webpage or shown in the menu above.
Readers: the rules for commenting!
No registration is required. I welcome all opinions, even those that strongly criticize my commentary.
However, name-calling and obscenities will not be tolerated. First time offenders who are new to the site will be warned. Second time offenders or first time offenders who have been here awhile will be suspended for a week. After that, I will ban you. Period.
Note also that first time commenters as well as any comment with more than one link will be placed in moderation for my approval. Be patient, I will get to it.