Virgin Galactic unveils new SpaceShipTwo

The competition heats up: On Friday Virgin Galactic unveiled their replacement SpaceShipTwo, dubbed Unity, replacing the first ship destroyed 16 months ago during a failed flight test.

As is typical of Virgin Galactic, they managed to garner a lot of press coverage of this event. To me, it is a big big yawn. I want to see this ship flying, not towed out from a hanger by an SUV with Richard Branson waving to the crowd.

And until they do, I will consider everything Virgin Galactic does at this point to me nothing more than empty public relations bull.

A frozen underground ocean on Charon?

Data from New Horizons of the surface of Pluto’s moon Charon now suggests that the satellite once had an underground ocean that is now frozen.

Charon’s outer layer is primarily water ice. When the moon was young this layer was warmed by the decay of radioactive elements, as well as Charon’s own internal heat of formation. Scientists say Charon could have been warm enough to cause the water ice to melt deep down, creating a subsurface ocean. But as Charon cooled over time, this ocean would have frozen and expanded (as happens when water freezes), pushing the surface outward and producing the massive chasms we see today.

Apollo 11 First Stage liftoff in Ultra Slow Motion

An evening pause: This footage was taken on July 16, 1969 at 500 frames per second, and shows only what happened at the base of the launch tower as the engines of the Saturn 5 rocket ignited and lifted the rocket into the air. Though the video is more than 8 minutes long, the actual events recorded lasted only about 30 seconds, beginning 5 seconds before T minus 0.

What struck me most as I watched this was the incredible amount of complex engineering that went into every single small detail of the rocket and the launch tower and launchpad. We tend to take for granted the difficulty of rocket engineering. This video will make you appreciate it again.

It is also mesmerizing. A lot happens in a very short period of time.

Hat tip Kyle Kooy.

India okays its own LIGO detector

The Indian government today approved construction of LIGO-India, using some duplicate components already available from the American LIGO gravitational wave detector.

“We have built an exact copy of that instrument that can be used in the LIGO-India Observatory,” says David Shoemaker, leader of the Advanced LIGO Project and director of the MIT LIGO Lab, “ensuring that the new detector can both quickly come up to speed and match the U.S. detector performance.” LIGO will provide Indian researchers with the components and training to build and run the new Advanced LIGO detector, which will then be operated by the Indian team.

What this new instrument will accomplish is to give astronomers more information when a gravitational wave rolls past the Earth. By having detectors half a world apart, they will be able to better triangulate the direction the wave came from, which in turn will help astronomers eventually pinpoint its source event.

Bureaucrats fight over the regulation of commercial space

Battle of bureaucrats: The FAA’s office that regulates commercial space (AST) and the National Transportation Safety Boad (NTSB) are fighting over the procedures AST should use to control and manage the work of private space companies.

The issues deal with how the FAA inspects the work of space companies, prompted by the NTSB’s investigation into the Virgin Galactic SpaceShipTwo crash in 2014. The kerfuffle also illustrates the absurdity of the regulatory responsibilities that Congress forced on AST when it amended the commercial space act in 2004. Somehow it is expected that bureaucrats in Washington will know better how to make sure a private company’s new space designs are safe than the very engineers who are building them. The disagreement here is merely about how the bureaucrats keep watch. The NTSB wants AST’s bureaucrats to hover over them like a worried mother. AST wants to hover from a little farther away, like a proud father.

In either case, the hovering will accomplish little to make the cutting edge engineering more safe except create fake jobs in the government for hovering bureaucrats, while squelching risky innovation since such risks go against the instincts of every bureaucrat.

Though Congress has recently revised the law to ease its regulations, they didn’t really do much to remove them. Expect these kerfuffles to get bigger in the coming years as the Washington bureaucracy moves to impose its will on this industry while simultaneously manipulating the press and Congress to create more useless jobs for themselves.

If they succeed, we should also expect them to succeed in making innovative commercial development in space become increasingly impossible.

Ukraine’s aerospace industry in collapse

The Russian government’s takeover of its entire aerospace industry, plus its war in the Ukraine, has caused an 80% crash in Ukraine’s aerospace industry.

The two largest enterprises are the Yuzhnoye Design Bureau and the PA Yuzhmash manufacturing company, which work closely together on Ukrainian launch vehicles. Yuzhmash produces the first stages of the Zenit and Antares boosters and a fourth stage for Europe’s Vega launch vehicle. The company is also involved in the conversion of retired ballistic missiles into Dnepr satellite launchers as part of a joint program with Russia.

However, Russia is phasing out use of the Zenit and Dnepr launchers. Russia is shifting over to using Angara and Soyuz-2.1v, newer rockets the nation produces domestically. Russia is also switching to domestic manufacturers for space components to reduce their dependence on foreign suppliers.

This destruction by Russia of its neighbor’s aerospace industry doesn’t necessarily bode well for Russia’s own aerospace industry. Consolidated as it is into one giant entity, with no competition, it is very likely it will not produce much that is very innovative or creative at a reasonable cost. Russia was better off with the competition.

LISA Pathfinder’s cubes floating free

More gravitational wave news: LISA Pathfinder’s two gold-platinum 46mm cubes have been released and are now floating free inside their spacecraft.

After a week of further testing, they will stop controlling the cube’s positions with electrostatic force. They will then watch them very precisely with lasers to test whether the equipment is capable of detecting distance shifts small enough for a future version, made up of three such spacecraft, to detect gravitational waves. The idea is that, as a wave rolls by, the cubes will shift positions at slightly different times, just as different beach balls will do so on ocean waves.

The first geology map of Pluto

Geology map of Pluto

The New Horizons science team has now released the first geology map of a portion of Pluto, seen by the spacecraft during its fly-by last year.

It is definitely worth your while to take a look at the full image, along with the legend explaining the different surface features. Most of the geological terms are merely descriptive, but the careful breakdown still provides a much deeper understanding of what is there.

A toy replicator for kids!

Mattel is bringing back an old toy, Thingmaker, but the new version will be a 3D printer for kids.

After wirelessly linking the 3D printer to a mobile device running the ThingMaker Design App for iOS or Android, users decide whether they want to create a toy figure or jewelry, with the option to print ready-designed toys, or mix and match from hundreds of parts which can be popped together after printing thanks to ball and socket joints. After designing their creation, users simply push a button to start printing.

Features of the ThingMaker 3D printer which make it more suitable for children than your typical 3D printer include it being simple to use, and having an auto-locking door. This will stay shut until your toy is at a safe temperature and the hot print head has retracted into a recess, so that it can’t burn eager little fingers.

Simplicity is applicable to adults as well. This gives us a hint where all 3D printing is heading.

And though the article describes as a negative the fact that it will routinely take 12 hours for each toy to print, I consider this irrelevant. I would have loved to have this thing as a kid, and would have gladly tried out a new design each day, just for fun. The toys themselves are what is irrelevant, not the creation process.

The first music video in zero gravity

Update: The music video itself has been pulled from youtube for copyright reasons that I don’t quite understand. However, the making of video is still available, and that will give you a pretty good feel for some of the stuff in the original piece.

I was going to make this an evening pause, but then decided it shouldn’t wait. This music video, by OK-Go, is unique and somewhat historic, as it I think is the first to have been done in zero gravity, using an airplane to fly parabolic arcs. It demonstrates clearly the fantastic and as present almost unimaginable possibilities of dance in weightlessness, as it also might be the first time that professional dancers, the two women, are given a chance to do moves in microgravity.

Be sure to also watch the making of video below the fold. And go here for the story behind the video.


» Read more

SpaceX loses a launch payload

In the heat of competition: Because of delays, a satellite company has shifted its launch vehicle from SpaceX’s Falcon Heavy to Arianespace’s Ariane 5

The company, ViaSat, still has a contract with SpaceX to use Falcon Heavy to launch later satellites, but they decided they could no longer wait and needed to get the satellite in orbit by 2017, something that SpaceX could no longer guarantee. They had to pay more to fly on Ariane 5, but it appears they were able to negotiate a price break with Arianespace to close the deal.

The graffiti inside Apollo 11

An effort to create a 3D model of the inside of the Apollo 11 capsule on display at the National Air & Space Museum has revealed previously undocumented notes and scribbles that the astronauts put on the capsule’s walls.

Needell and his team also decided that they would provide access to the lower equipment bay, the area located below the astronauts’ seats, which housed the ship’s navigation sextant, telescope and computer. “No one from the Smithsonian, as far I knew — not as long as I’ve been the curator for 20 years, has ever been below there to document the conditions or any of the aspects of the lower equipment bay,” said Needell. “We’ve been able to sort of see above the seats, but that’s about all.”

So, for the first time, the curators removed from the lower bay the large bag that held the Apollo 11 crew’s pressure garment assemblies — in other words, their spacesuits — as well as several helmet bags and a checklist pocket that command module pilot Michael Collins used while orbiting the moon alone.

And then they saw it, the literal writing on the wall.

They have located at least one post-landing image that shows some of the writing, which indicates that in 1969 no one considered this important enough to note. Then the capsule was put on display, and no one was allowed in it for decades.

The final search for Philae

This review of the journey of Rosetta’s lander Philae, now dead on the surface of Comet 67P/C-G, includes information about the science’s team upcoming last effort to locate the lander.

The comet’s level of activity is now decreasing, allowing Rosetta to safely and gradually reduce its distance to the comet again,” says Sylvain Lodiot, ESA’s Rosetta spacecraft operations manager. “Eventually we will be able to fly in ‘bound orbits’ again, approaching to within 10–20 km – and even closer in the final stages of the mission – putting us in a position to fly above Abydos close enough to obtain dedicated high-resolution images to finally locate Philae and understand its attitude and orientation.”

“Determining Philae’s location would also allow us to better understand the context of the incredible in situ measurements already collected, enabling us to extract even more valuable science from the data,” says Matt Taylor, ESA’s Rosetta project scientist.

They intend to try to re-establish communications with the lander, but do not have much expectations that it is able to function.

First direct detection of a gravitational wave

The science team from the Laser Interferometer Gravitational-wave Observatory (LIGO) announced today that on September 14, 2015 they made the first direct detection of a gravitational wave, produced by the merging of two distant black holes.

Based on the observed signals, LIGO scientists estimate that the black holes for this event were about 29 and 36 times the mass of the sun, and the event took place 1.3 billion years ago. About three times the mass of the sun was converted into gravitational waves in a fraction of a second — with a peak power output about 50 times that of the whole visible universe. By looking at the time of arrival of the signals — the detector in Livingston recorded the event 7 milliseconds before the detector in Hanford — scientists can say that the source was located in the Southern Hemisphere.

According to general relativity, a pair of black holes orbiting around each other lose energy through the emission of gravitational waves, causing them to gradually approach each other over billions of years, and then much more quickly in the final minutes. During the final fraction of a second, the two black holes collide at nearly half the speed of light and form a single more massive black hole, converting a portion of the combined black holes’ mass to energy, according to Einstein’s formula E=mc2. This energy is emitted as a final strong burst of gravitational waves. These are the gravitational waves that LIGO observed.

Because of the faintness of the wave signal, I suspect that the scientists involved have spent the last four months reviewing their data and the instrument very carefully, to make sure this was not a false detection. That they feel confident enough to make this announcement tells us that they think the detection was real.

Recently ESA launched Lisa Pathfinder, a prototype space-based gravitational wave detector designed to test the technology for building a larger in-space observatory that would be far more sensitive that LIGO. Funding for that larger detector has dried up, Today’s announcement will likely help re-energize that funding effort.

More information here.

Mold forces Cygnus launch delay

The discovery of mold in two clothing bags being packed for a Cygnus freighter launch to ISS has caused NASA to delay the launch by at least two weeks.

The source of the mold, a common fungal growth in humid climates like Florida’s, is under investigation by NASA and Lockheed Martin, which prepares NASA cargo for launch aboard two commercial carriers, Orbital ATK and privately owned SpaceX. An Orbital Cygnus cargo ship was more than halfway packed for the launch, scheduled for March 10, when the mold was found during routine inspections and microbial sampling, NASA spokesman Daniel Huot said.

The mold did not present any serious health threat should it have arrived at ISS, but it is definitely preferred to not fly it there if possible.

SpaceX to reduces chance of first stage recovery on SES-9 launch

In the heat of competition: Because of SpaceX’s delays in launching the SES-9 communications satellite, the company has modified the launch profile of its Falcon 9 rocket, abandoning a land vertical landing and reducing the odds for a successful barge landing, in order to get the satellite to its proper orbit sooner.

SES will thus be able to generate income from the satellite at about the same time it would have had their launch not been delayed. SpaceX meanwhile will still try to recover the first stage, but will face much more difficult odds.

One industry official familiar with the SES-9 mission said Hawthorne, California-based SpaceX has not abandoned hope of recovering the first stage after a landing on an offshore platform positioned for the mission. But the chances of success are much less given the launch trajectory agreed to with SES to reduce the time to arrival at its operating position.

A new Japanese X-ray telescope to launch February 12

Third time the charm? Japan will launch on Friday a new X-ray telescope, the third time they have attempted to put this type of observatory into orbit.

Astro-H, which according to Japanese custom will be renamed upon successful launch, will collect the X-ray spectra for large deep space objects like galaxy clusters. An American scientist, Richard Kelley, has been trying to get this kind of instrument launched since 1984. First his instrument was dropped from Chandra because of cost. Then, two attempts to launch it by Japan failed, one when the rocket failed during launch and the second when the spacecraft itself failed soon after reaching orbit.

North Korea’s satellite tumbling

U.S. Defense officials stated today that the satellite that North Korea launched on Sunday is now tumbling in orbit and is useless.

Do not take comfort from this failure. North Korea has demonstrated that it can put payloads in orbit. From this achievement it is a very short leap to aiming those payloads to impact any continent on Earth. They might not be able to aim that impact very accurately, but if you want to ignite an atomic bomb somewhere, you don’t have to be very accurate.

1 383 384 385 386 387 528