The UK launches a 3D printed airplane drone
A University of Southampton team, under a project for the Royal Navy of the United Kingdom, have built and launched an entirely 3D printed unmanned air vehicle (UAV) from a navy ship.
Produced under the institution’s Project Triangle, the Southampton University Laser Sintered Aircraft (SULSA) UAV was launched via catapult from the patrol vessel HMS Mersey, and flew over the Wyke Regis training facility near Weymouth in the south of the country to land on Chesil beach. The 5min sortie covered a range of some 500m, with the UAV carrying a small video payload to record the mission so that operators could monitor it during the flight.
SULSA measures 150cm (59in) and weighs 3kg (6.6lb), and is made via 3D printing using laser sintered nylon. The university claims that SULSA is the world’s first UAV made entirely via the technique. It consists of four separately manufactured main parts that are assembled without the need for any additional tools.
The specific achievement here is interesting, but its significance in illustrating the growing use of unmanned drones and 3D printing is more important. Very soon, a large percentage of everything we own will be built with 3D printing technology, lowering the cost while making construction easier. As for drones, they carry both positive and negative possibilities.
On Christmas Eve 1968 three Americans became the first humans to visit another world. What they did to celebrate was unexpected and profound, and will be remembered throughout all human history. Genesis: the Story of Apollo 8, Robert Zimmerman's classic history of humanity's first journey to another world, tells that story, and it is now available as both an ebook and an audiobook, both with a foreword by Valerie Anders and a new introduction by Robert Zimmerman.
The ebook is available everywhere for $5.99 (before discount) at amazon, or direct from my ebook publisher, ebookit. If you buy it from ebookit you don't support the big tech companies and the author gets a bigger cut much sooner.
The audiobook is also available at all these vendors, and is also free with a 30-day trial membership to Audible.
"Not simply about one mission, [Genesis] is also the history of America's quest for the moon... Zimmerman has done a masterful job of tying disparate events together into a solid account of one of America's greatest human triumphs."--San Antonio Express-News
A University of Southampton team, under a project for the Royal Navy of the United Kingdom, have built and launched an entirely 3D printed unmanned air vehicle (UAV) from a navy ship.
Produced under the institution’s Project Triangle, the Southampton University Laser Sintered Aircraft (SULSA) UAV was launched via catapult from the patrol vessel HMS Mersey, and flew over the Wyke Regis training facility near Weymouth in the south of the country to land on Chesil beach. The 5min sortie covered a range of some 500m, with the UAV carrying a small video payload to record the mission so that operators could monitor it during the flight.
SULSA measures 150cm (59in) and weighs 3kg (6.6lb), and is made via 3D printing using laser sintered nylon. The university claims that SULSA is the world’s first UAV made entirely via the technique. It consists of four separately manufactured main parts that are assembled without the need for any additional tools.
The specific achievement here is interesting, but its significance in illustrating the growing use of unmanned drones and 3D printing is more important. Very soon, a large percentage of everything we own will be built with 3D printing technology, lowering the cost while making construction easier. As for drones, they carry both positive and negative possibilities.
On Christmas Eve 1968 three Americans became the first humans to visit another world. What they did to celebrate was unexpected and profound, and will be remembered throughout all human history. Genesis: the Story of Apollo 8, Robert Zimmerman's classic history of humanity's first journey to another world, tells that story, and it is now available as both an ebook and an audiobook, both with a foreword by Valerie Anders and a new introduction by Robert Zimmerman.
The ebook is available everywhere for $5.99 (before discount) at amazon, or direct from my ebook publisher, ebookit. If you buy it from ebookit you don't support the big tech companies and the author gets a bigger cut much sooner.
The audiobook is also available at all these vendors, and is also free with a 30-day trial membership to Audible.
"Not simply about one mission, [Genesis] is also the history of America's quest for the moon... Zimmerman has done a masterful job of tying disparate events together into a solid account of one of America's greatest human triumphs."--San Antonio Express-News
Readers: the rules for commenting!
No registration is required. I welcome all opinions, even those that strongly criticize my commentary.
However, name-calling and obscenities will not be tolerated. First time offenders who are new to the site will be warned. Second time offenders or first time offenders who have been here awhile will be suspended for a week. After that, I will ban you. Period.
Note also that first time commenters as well as any comment with more than one link will be placed in moderation for my approval. Be patient, I will get to it.