World’s largest jet engine makes first test flight
The world’s largest jet engine, built by GE Aviation for Boeing’s next generation wide body passenger jet, made its first test flight last week.
The GE9X is a monster compared to its predecessors. Due to the extensive use of composites in building the fan blades and the fan case, 3D-printed nozzles, new light- and heat-resistant ceramics, and reducing the number of fan blades from 22 to 16, GE was able to lighten the engine and expand its size so that its fan is now 134-inches (341 cm) across and the entire engine is as wide as a Boeing 737 fuselage. In addition, it can push 100,000 lb of thrust and is 10 percent more efficient than the GE90 engine used on the current generation of 777s.
The engine was attached to a 747 test plane for the flight, and the images at the link truly illustrate how large this engine is. The 747 still had its two outer normal engines attached, and the size difference is gob-smacking. When I first looked at the pictures I was convinced it was fake and that they had photoshopped this giant engine onto the 747. They didn’t.
Readers!
Please consider supporting my work here at Behind the Black. Your support allows me the freedom and ability to analyze objectively the ongoing renaissance in space, as well as the cultural changes -- for good or ill -- that are happening across America. Fourteen years ago I wrote that SLS and Orion were a bad ideas, a waste of money, would be years behind schedule, and better replaced by commercial private enterprise. Only now does it appear that Washington might finally recognize this reality.
In 2020 when the world panicked over COVID I wrote that the panic was unnecessary, that the virus was apparently simply a variation of the flu, that masks were not simply pointless but if worn incorrectly were a health threat, that the lockdowns were a disaster and did nothing to stop the spread of COVID. Only in the past year have some of our so-called experts in the health field have begun to recognize these facts.
Your help allows me to do this kind of intelligent analysis. I take no advertising or sponsors, so my reporting isn't influenced by donations by established space or drug companies. Instead, I rely entirely on donations and subscriptions from my readers, which gives me the freedom to write what I think, unencumbered by outside influences.
You can support me either by giving a one-time contribution or a regular subscription. There are four ways of doing so:
1. Zelle: This is the only internet method that charges no fees. All you have to do is use the Zelle link at your internet bank and give my name and email address (zimmerman at nasw dot org). What you donate is what I get.
2. Patreon: Go to my website there and pick one of five monthly subscription amounts, or by making a one-time donation.
3. A Paypal Donation or subscription:
4. Donate by check, payable to Robert Zimmerman and mailed to
Behind The Black
c/o Robert Zimmerman
P.O.Box 1262
Cortaro, AZ 85652
You can also support me by buying one of my books, as noted in the boxes interspersed throughout the webpage or shown in the menu above.
The world’s largest jet engine, built by GE Aviation for Boeing’s next generation wide body passenger jet, made its first test flight last week.
The GE9X is a monster compared to its predecessors. Due to the extensive use of composites in building the fan blades and the fan case, 3D-printed nozzles, new light- and heat-resistant ceramics, and reducing the number of fan blades from 22 to 16, GE was able to lighten the engine and expand its size so that its fan is now 134-inches (341 cm) across and the entire engine is as wide as a Boeing 737 fuselage. In addition, it can push 100,000 lb of thrust and is 10 percent more efficient than the GE90 engine used on the current generation of 777s.
The engine was attached to a 747 test plane for the flight, and the images at the link truly illustrate how large this engine is. The 747 still had its two outer normal engines attached, and the size difference is gob-smacking. When I first looked at the pictures I was convinced it was fake and that they had photoshopped this giant engine onto the 747. They didn’t.
Readers!
Please consider supporting my work here at Behind the Black. Your support allows me the freedom and ability to analyze objectively the ongoing renaissance in space, as well as the cultural changes -- for good or ill -- that are happening across America. Fourteen years ago I wrote that SLS and Orion were a bad ideas, a waste of money, would be years behind schedule, and better replaced by commercial private enterprise. Only now does it appear that Washington might finally recognize this reality.
In 2020 when the world panicked over COVID I wrote that the panic was unnecessary, that the virus was apparently simply a variation of the flu, that masks were not simply pointless but if worn incorrectly were a health threat, that the lockdowns were a disaster and did nothing to stop the spread of COVID. Only in the past year have some of our so-called experts in the health field have begun to recognize these facts.
Your help allows me to do this kind of intelligent analysis. I take no advertising or sponsors, so my reporting isn't influenced by donations by established space or drug companies. Instead, I rely entirely on donations and subscriptions from my readers, which gives me the freedom to write what I think, unencumbered by outside influences.
You can support me either by giving a one-time contribution or a regular subscription. There are four ways of doing so:
1. Zelle: This is the only internet method that charges no fees. All you have to do is use the Zelle link at your internet bank and give my name and email address (zimmerman at nasw dot org). What you donate is what I get.
2. Patreon: Go to my website there and pick one of five monthly subscription amounts, or by making a one-time donation.
3. A Paypal Donation or subscription:
4. Donate by check, payable to Robert Zimmerman and mailed to
Behind The Black
c/o Robert Zimmerman
P.O.Box 1262
Cortaro, AZ 85652
You can also support me by buying one of my books, as noted in the boxes interspersed throughout the webpage or shown in the menu above.
They could make a two engined 747 with this I would guess
The article is wrong, the GE90-115B used on some current 777’s produces 115,300 lbf of thrust and is physically as large.
Here is what Wikipedia has to say about the comparison between the GE9X and the GE90-115B:
https://en.wikipedia.org/wiki/General_Electric_GE90#Operational_history
The New Atlas article says that the GE9X fan diameter is 134-inches (341 cm).