To read this post please scroll down.

 

Readers!

 

My July fund-raising campaign to celebrate the fifteenth anniversary since I began Behind the Black is now over. I want to thank all those who so generously donated or subscribed, especially those who have become regular supporters. I can't do this without your help. I also find it increasingly hard to express how much your support means to me. God bless you all!

 

The donations during this year's campaign were sadly less than previous years, but for this I blame myself. I am tired of begging for money, and so I put up the campaign announcement at the start of the month but had no desire to update it weekly to encourage more donations, as I have done in past years. This lack of begging likely contributed to the drop in donations.

 

No matter. I am here, and here I intend to stay. If you like what I do and have not yet donated or subscribed, please consider supporting my work here at Behind the Black. You can support me either by giving a one-time contribution or a regular subscription. There are four ways of doing so:

 

1. Zelle: This is the only internet method that charges no fees. All you have to do is use the Zelle link at your internet bank and give my name and email address (zimmerman at nasw dot org). What you donate is what I get.

 

2. Patreon: Go to my website there and pick one of five monthly subscription amounts, or by making a one-time donation.
 

3. A Paypal Donation or subscription:

 

4. Donate by check, payable to Robert Zimmerman and mailed to
 
Behind The Black
c/o Robert Zimmerman
P.O.Box 1262
Cortaro, AZ 85652

 

You can also support me by buying one of my books, as noted in the boxes interspersed throughout the webpage or shown in the menu above.


Starliner schedule shapes up

The competition heats up: The schedule and launch plans for Boeing’s manned Starliner spacecraft are now becoming solidified.

For Boeing, Starliner will first launch on an uncrewed test flight to the Station via the “Boe-OFT” mission in April or May, 2017 – on a 30 day mission, ending with a parachute-assisted return. Should all go to plan, the second mission will involve a crew on a mission designated “Boe-CFT”, launching sometime between July and September, 2017, on a 14-day mission to the ISS.

The article also outlines the launch procedures Boeing intends to follow, some determined by the company and some by NASA’s complex safety rules. One interesting tidbit about Starliner revealed here that I was unaware of previously is that the capsule is made of separate top and bottom units that are only fitted together late in the launch process, allowing for easier access.

Genesis cover

On Christmas Eve 1968 three Americans became the first humans to visit another world. What they did to celebrate was unexpected and profound, and will be remembered throughout all human history. Genesis: the Story of Apollo 8, Robert Zimmerman's classic history of humanity's first journey to another world, tells that story, and it is now available as both an ebook and an audiobook, both with a foreword by Valerie Anders and a new introduction by Robert Zimmerman.

 

The print edition can be purchased at Amazon or from any other book seller. If you want an autographed copy the price is $60 for the hardback and $45 for the paperback, plus $8 shipping for each. Go here for purchasing details. The ebook is available everywhere for $5.99 (before discount) at amazon, or direct from my ebook publisher, ebookit. If you buy it from ebookit you don't support the big tech companies and the author gets a bigger cut much sooner.


The audiobook is also available at all these vendors, and is also free with a 30-day trial membership to Audible.
 

"Not simply about one mission, [Genesis] is also the history of America's quest for the moon... Zimmerman has done a masterful job of tying disparate events together into a solid account of one of America's greatest human triumphs."--San Antonio Express-News

2 comments

  • wodun

    Would this make reusing the capsule easier? Just pop off the bottom part and hook up a new one. Any damage to the heat shield wouldn’t ruin the whole capsule or require waiting for the heatshield to be refurbished.

  • Edward

    If I read it right, they are able to access the various components in the bottom section (thrusters, electronics, batteries, tanks, etc.) for easy refurbishment or replacement. Many of these are located outside the pressurized section, so removing the conical hull would allow easy access to these

    My guess is that the heat shield is bolted through the inside of the bottom section, and removing the conical hull almost certainly helps access these bolts.

    While working on the bottom section, the upper section can be refurbished (equipment/supply lockers, control panels, parachutes, etc.). Turnaround time can be reduced through ease of access and by working on both sections simultaneously.

    The cost to this process seems to be minor, as it is probably mostly the time spent disassembling and reassembling the two sections and the time spent verifying that they are properly airtight and properly interacting after reassembly. I would guess that this takes little more than four shifts, but the additional access probably saves dozens of shifts worth of time spent crawling all over each other.

    Wodun probably has the right idea. If one section takes longer to refurbish, then it can be replaced by another section that has already been finished. That way you may only need, for instance, two tops and three or five bottoms.

Readers: the rules for commenting!

 

No registration is required. I welcome all opinions, even those that strongly criticize my commentary.

 

However, name-calling and obscenities will not be tolerated. First time offenders who are new to the site will be warned. Second time offenders or first time offenders who have been here awhile will be suspended for a week. After that, I will ban you. Period.

 

Note also that first time commenters as well as any comment with more than one link will be placed in moderation for my approval. Be patient, I will get to it.

Leave a Reply

Your email address will not be published. Required fields are marked *