Tag: Starship

Capitalism in space: SpaceX today successfully completed a 150-meter high hop of its sixth Starship prototype, the second such hop but the first for this prototype. They have now flown two different prototypes, plus Starhopper, all successfully. No flight failures, so far.

Next they will be doing a pressure tank test, to failure, of the seventh prototype. That prototype is using what they think will be a better steel alloy, and they want to find out its limits. I have also heard that they will either fly this prototype again or fly the fifth again, sometime in the next two weeks.

I have embedded a few more images below the fold.
» Read more

Capitalism in space: Engineers at SpaceX’s Boca Chica facility in Texas are today preparing the sixth Starship prototype for its first 150 meter hop, the second hop of a Starship prototype overall.

The launch window is anytime between 8 am and 8 pm (Central). I have embedded the livesteam below the fold if you wish to watch. Based on previous attempts, they will try for a morning launch before noon, and if there are issues they will recycle and try again in the afternoon.
» Read more

Capitalism in space: Though it appeared twice today that SpaceX engineers were on the verge of executing their second Starship prototype hop, the first for prototype #6, in both cases they stood down.

It appears according to road closures in Boca Chica they will try again tomorrow. The live stream is available here. The closures go from 8 am to 8 pm (Central), within which the hop could occur at almost any time, but likely not before 9 am.

Link here. They have already flown some tiles on both a Dragon cargo flight as well as Starhopper’s one flight. They are now accelerating the work by testing the installation of a lot of hexagon-shapped tiles directly onto the steel hull of the Starship prototypes. From the article:

Behind the scenes, SpaceX is assuredly performing extensive laboratory-style tests with tiles and an agreement signed with NASA Ames Research Center confirmed that the company is using the facility’s arcjet to physically simulate the conditions of orbital-velocity reentry. Tests on the scale of a full Starship, however, are an entirely different story.

The first signs of large-scale heat shield installation testing appeared on July 9th when local resident and photographer Andrew Goetsch (Nomadd) captured photos of a test coupon covering half of an entire steel Starship ring. In April 2020, CEO Elon Musk confirmed on Twitter that the current design involved affixed heat shield tiles directly to Starship’s steel hull with steel studs. It’s unclear how exactly the company is installing steel studs directly onto the ~4mm (0.15 in) thick skins of a pressure vessel or if an off -the-shelf solution was available but Nomadd’s July 9th photos explicitly show the process required to refine the settings on the mystery stud installer.

The article has some good pictures. Expect to see a lot of these tiles on the surface of future prototypes.

Capitalism in space: Having moved its fifth Starship prototype back to its facility at Boca Chica for repairs to its legs following its first light, SpaceX is simultaneously preparing its sixth Starship prototype for its own hops.

They plan more short hops to smooth out the launch process, aiming for the ability to do several per day, followed later by a much higher altitude hop. Expect the next hop within about two weeks.

Shortly after take-off.

Right after landing.

After the smoke has cleared.

Capitalism in space: SpaceX’s fifth Starship prototype today successfully completed a 150 meter hop at its Boca Chica facility in Texas, landing vertically.

I have embedded a video of the flight below the fold.

The screen capture to the right shows it in flight. It is canted slightly because its one Raptor engine was not centered at its base but offset.

The next image shows the prototype standing vertical on the ground to the left of Starhopper, which flew one year ago. All told the flight lasted only about a minute.

The final image shows a close-up of the prototype after the smoke has cleared. Why it is canted on the ground is not clear. Its legs are not visible (they apparently are relatively small), so it is hard to say whether one buckled or not.

The launch platform might have sustained damage but they have another ready to go. It is even conceivable that they could fly this prototype again, though they already have prototype #8 waiting in the wings.

Regardless, expect SpaceX to keep its fast development pace going. I would not be surprised if they attempt another test flight in less than two weeks.

Screen captures courtesy of the LabPadre live stream.
» Read more

UPDATE: They are close to trying again. If you refresh your screen, you will now have two iterations of the live stream. This will allow you to have two cameras visible at the same time, You can show the main “nerdie” camera on one, with their commentary, and show the wider “sapphire” camera on the second. You pick cameras by clicking on the camera icon in the menu bar at the bottom of the screen.

UPDATE: First attempt apparently aborted. No word yet if they will attempt again today.

UPDATE: Scrubbed on August 3rd, attempting again on August 4th.

Capitalism in space: SpaceX’s Starship team has scheduled the first 500 foot hop of the fifth Starship prototype today, after canceling yesterday’s attempt.

The window for Starship SN5’s 150m hop debut now stretches from 8am to 8pm CDT (13:00-01:00 UTC) on Monday, August 3rd. It’s currently unknown if SpaceX will offer its own live coverage of the test flight but several unofficial streams will likely be available from NASASpaceflight.com, LabPadre, SPadre, and more. Stay tuned for updates!

I have embedded LabPadre’s live stream below the fold, if you wish to run it in the background. They will have commentary when they note a “pad clear” signal.
» Read more